Startseite
»
Schaltermaterial
»
Gira
»
EIB / Funk
»
EIB
»
Gira DALI-Gateway Tunable WH Plus KNX REG 210800
Gira DALI-Gateway Tunable WH Plus KNX REG 210800
KNX DALI-Gateway Tunable White Plus Merkmale: Steuern von Leuchten und anderen Anwendungen mit DALI-Betriebsgerät in KNX Installationen. Einstellung der Farbtemperatur für Leuchten mit DALI Device Type 8 (Clour Type: Colour Temperatur) für Tunable White gemäß IEC 62386-209. Kurzschlussschutz, Überspannungsschutz, Überlastschutz. Schalten und Dimmen von maximal 64 Leuchten mit DALI-Betriebsgeräten. Bis zu 6 unterschiedliche Adressierungsarten ermöglichen das gruppenorientierte und einzeladressierte Ansteuern von DALI-Leuchten über KNX Telegramme. Bei Gruppenadressierung stehen bis zu 32 unabhängige DALI-Gruppen zur Verfügung. Diese können um 64 einzeladressierbare DALI-Gerätekanäle ergänzt werden. Ansteuerung von DALI-Betriebsgeräten des Gerätetyps "Colour Control" (DALI Device Type 8, Colour Type: Colour Temperature) in der spezifischen Ausprägung "Tunable White (TW)". Steuerung der Farbtemperatur über relatives oder absolutes Dimmen und zusätzlich über Szenen und Effekte. Zentralsteuerung aller angeschlossenen DALI-Komponenten möglich (Broadcast). Handbetätigung unabhängig vom Bus (Baustellenbetrieb mit Broadcast-Steuerung). Steuerung des Schaltzustands und der Helligkeit. Rückmeldungen von DALI-Fehlerstatus oder DALI-Kurzschluss und Meldung von Ausfall der Versorgungsspannung. Zentrale Schaltfunktion. Sammelrückmeldung aller Schaltzustände möglich. 16 Lichtszenen. Effektsteuerung zur Realisierung dynamischer Lichtstimmungen. 16 Effekte mit jeweils bis zu 16 Effekt-Schritten. Timer mit dem sich Effekte abhängig von Uhrzeit und Wochentag starten und stoppen lassen. Gruppen- und Gerätefunktionen: Schalten und Helligkeitswert: Aktive oder passive Rückmeldefunktionen. Einstellung der Helligkeitsgrenzwerte (Minimal- bzw. Maximalhelligkeit). Dimmverhalten und Dimmkennlinien parametrierbar. Lampenschonendes Ein- und Ausschalten. Sperrfunktion oder Zwangsstellungsfunktion parametrierbar. Zeitfunktionen (Ein-, Ausschaltverzögerung, Treppenhausfunktion - auch mit Vorwarnfunktion). Betriebsstundenzähler. DALI-Power-ON-Level und DALI-System-Failure-Level einstellbar. Reaktionen bei Busspannungsausfall und -wiederkehr und nach ETS-Programmiervorgang einstellbar. Steuerung der Farbtemperatur über absolutes Dimmen und relatives Dimmen, parametrierbares Dimmverhalten, minimale und maximale Farbtemperatur einstellbar, Rückmeldungen für aktuelle und ungültige Farbtemperatur. Betrieb von Notleuchten: Einbindung des Geräts in DALI-Notlichtsysteme. Das DALI-Gateway ist in der Lage, DALI-Standardbetriebsgeräte für Beleuchtungssteuerungen gemäß IEC 62386-101 (DALI-System) und IEC 62386-102 (Control-Gear) als Notleuchte in zentralversorgte Notlichtsysteme zu integrieren. Überwachung auf Ausfall der allgemeinen Spannungsversorgung. Verhalten am Ende des Notbetriebs einstellbar. Helligkeit und Farbtemperatur bei aktivem Notbetrieb einstellbar. ETS-Plug-in: DALI-Inbetriebnahme ohne zusätzliche Softwarekomponenten. Das Identifizieren, Adressieren und Zuordnen von DALI-Betriebsgeräten erfolgt im ETS-Plug-in. Zuordnen von Einzelgeräten zu Gruppen auch ohne Programmierverbindung zum Gerät. Kompatibilitätsprüfung der DALI-Gerätetypen bei der Zuordnen von DALI-Betriebsgeräten. Kompatibilitätsmodus zur Unterstützung nicht DALI-konformer Betriebsgeräte. Partielle DALI-Inbetriebnahme. Testfunktion aller angelegten DALI-Gruppen oder DALI-Betriebsgeräte. Exportieren und Importieren einer Vorlage. Druckfunktion zur Erstellung eines Reports. Hinweise : Betrieb von Notbeleuchtungsanlagen: Die gesetzlichen und normativen Vorgaben sind länderspezifisch unterschiedlich. Es ist in jedem Fall durch den Anwender Fachplaner zu prüfen, ob die spezifischen Vorgaben eingehalten werden. VDE-Zulassung gemäß EN 60669-1, EN 60669-2-1. Projektierung und Inbetriebnahme des Geräts ab ETS 4.2 oder ETS 5 (Empfehlung). Der Gira AppShop ist der Marktplatz für interessante Lösungen und Anwendungen der intelligenten Gebäudetechnik. Inzwischen sind dort mehr als 200 Apps erhältlich, darunter Anwendungsbeschreibungen, Plug-ins, Funktionsvorlagen, Logikbausteine und Musterprojekte. Entdecken Sie jetzt Anwendungen für das KNX DALI-Gateway Tunable White Plus. www.appshop.gira.de.
DALI gateway Tun.WH Plus DRA KNX KNX DALI gateway Tunable White Plus Features: - Control of lights and other applications with DALI operating units in KNX installations. - Adjustment of colour temperature for lights with DALI Device Type 8 (Colour Type: Colour Temperature) for Tunable White according to IEC 62386-209. - Short-circuit protection, overvoltage protection, overload protection. - Switching and dimming of a maximum of 64 lights with DALI operating devices. - Up to 6 different Up to addressing types enable control of individual or grouped DALI lights via KNX telegrams. - Up to 32 independent DALI groups are available for group addressing. These can be expanded by 64 individually addressable DALI device channels. - Control of DALI operating devices of device type "Colour Control" (DALI Device Type 8, Colour Type: Colour Temperature) in specific configuration "Tunable White (TW)". Control of colour temperature vial relative or absolute dimming and also via scenes and effects. - Central control of all connected DALI components possible (broadcast). - Manual operation independent of the bus (building site operation with broadcast control). Control of switching condition and brightness. - Feedback of DALI error status or DALI short circuit and signalling of power supply failure. - Central switching function. - Group feedback of all switching conditions possible. - 16 light scenes. - Effect control for realising dynamic lighting moods. 16 effects with up to 16 effect steps each. Timer enabling starting and stopping of effects independent of time and day of the week. Group and device functions: - Switching and brightness value: Active or passive feedback functions. - Setting brightness limits (minimum brightness or maximum brightness). - Dimming behaviour and dimming characteristics can be parameterised. - Bulb-saving switch-on and switch-off - Block function or forced setting function can be parameterised. - Time functions (switch-on switch-off delay, staircase light function - also with advance warning function). - Elapsed operating time meter. - DALI power-ON level and DALI system-failure level can be set. - Reactions in case of bus voltage failure and restoration can be set following ETS programming process. - Control of colour temperature via absolute dimming and relative dimming, dimming behaviour can be parameterised, adjustable minimum and maximum colour temperature, feedback for current and invalid colour temperature. Operation of emergency lighting: - Integration of the device into DALI emergency lighting systems. The DALI gateway is able to integrate DALI standard operating devices for lighting control in accordance with IEC 62386-101 (DALI system) and IEC 62386-102 (control gear) as an emergency light in centrally-powered emergency lighting systems. - Monitoring for failure of the general power supply. - Behaviour can be set for the end of emergency mode. - Brightness and colour temperature adjustable during activate emergency mode. ETS plug-in: - DALI initial start-up without additional software comnponents. Identification, addressing and assigning of DALI operating devices takes place in the ETS plug-in. - Assignment of individual devices to groups is also without programming connection to the device. - Compatibility check of DALI device type for assigning DALI operating devices. - Compatibility mode for support of operating devices which are not DALI-compliant. - Partial DALI start-up. - Test function of all created DALI groups or DALI operating devices. - Exporting or importing a template. - Printing function to create a report. Notes : - Operation of emergency lighting systems: Statutory and normative specifications vary by country. In any case, the user professional planner should ensure that the specific guidelines are observed. - VDE approval in accordance with EN 60669-1, EN 60669-2-1. - Configuration and start-up of the device from ETS 4.2 or ETS 5 (recommendation).
Leider sind noch keine Bewertungen vorhanden. Seien Sie der Erste, der das Produkt bewertet.